Features:

• Advanced peak detector automatic cut-off circuit with MOSFET and linear current charges battery to 100% without overcharging.
• Selectable 0DV and -DV cutoff technology for NICAD and NIMH battery respectively.
  8-bit 12MHz CPU with 32k ROM, 2k RAM, 4 channel 16 bit ADC, and 2 channel 10-bit DAC current control output.
• Output current automatic dec. if overload.
• Built-in watch-dog timer.
• Reverse polarity protected.
• Recharges 1 - 10 cells 100mAh - ￥mAh. Output current can be changed from 0.1A to 6.5A ( 0.1A step) and discharging current is 0.1A to 3A (0.1A step) with automatic discharger cut off voltage setup.
• 16 character dot-matrix LCD, display with output V, output A, mAh, time, average V, Wh, peak V, set charger A, set discharger A, input V and mode.
• Precision level reaches to 2 unit places and 3 decimal places. e.g. 11.934V.
• Built-in cooling fan.
  

Specifications:

• Input Voltage: DC 11V to 15V, 12V lead-acid battery or APEX V12 220V AC S.P.S
• Current drain: max approx 10A
• Normal battery voltage: 1.2V to 12.0V (1 to 10 NICD / NIMH cells)
• Charge current: 0.1A to 6.5A up to 15V, 0.1A to 4.0A over 15V
• Automatic charge termination: Delta Peak process
• Trickle charge current: approx. 80mA
• Discharge current: 0.1A to 3.0A
• Discharge termination: automatic, at approx. 0.8V / cell
• Max. discharge power: approx. 25W
• Protective functions: Polarity protection at inpur and output, short-circuit protection on output, overheating protection, low voltage protection.
• Fuse: 7.5A car fuse
• Dimensions: approx. 100*140*52mm