This is a MC230CR Electronic Speed Control w/ Reverse for 20+ Turn Motors.

FEATURES:

Operates motors that are 20 turns up to 27 turns (Stock Motors)

All connectors are pre-installed

One-touch set-up with set-up LED.

Fully proportional forward and reverse

Includes Reverse Disable so it is legal for ROAR racing

Heat/overload/short circuit protection

Low-battery feature automatically cuts motor power when power levels become too low.

Receiver reminder switch beeps to remind you to turn OFF the receiver and the vehicle will pulse (not run) forward as an additional reminder.

Brake

One year warranty

INCLUDES:

One MC230CR Electronic Speed Control w/ Reverse, Futaba J receiver connector, bullet connectors, standard type battery connector and ON/OFF switch.

One Set-Up Screwdriver (FUTM5685)

One Instruction Sheet

REQUIRES:

Futaba J plug compatible receiver

Female bullet motor connectors for motor, use TRIC5500.

SPECS:

Capacity: 6 to 7 cell batteries

Motor Limit: 20+ turns

Current- Forward: 90A Reverse: 45A

On resistance: .0035 Ohms

High Frequency: Yes, 1,500Hz

Connectors: Futaba J, Standard for Battery, Bullet Motor (all pre-installed)

Bullet Motor Wire: 16 gauge

BEC: Yes (6V) (1 amp)

Length: 1.07" (27.1mm)

Width: .50" (12.7mm)

Height: 1.31" (33.3mm)

Weight: 1.55oz (44g)

COMMENTS:

Generally, high-torque and brushless servos for steering control can be used with this ESC as long as the continuous current draw of the servo does not exceed 1A continuously. Do not use the Futaba S9157 high-torque servo with this ESC as this servo draws over 3A."

¡@