This is the Futaba MC401CR Electronic Speed Control with Reverse
for motors with 10 turns and above.
FEATURES:
SMD MOSFETs with smallest internal resistance for minimal loss and maximum
performance
Forward, Reverse, and Brake operations are all linear
Reverse operation cancellation function
Heat and low voltage protection
Serial port communication with a PC (Futaba CIU-2 Interface, FUTM0951
required)
Serial communication function-
Data logging read and erase (Data logging memorizes the running current and
power supply voltage for approximately 8-minutes at second intervals)
Variable frequency range settings: 100Hz to 10kHZ (Sets the load response
system variable frequency range)
Dead band: กำ2µs ~ กำ55µs (Neutral point range can be set)
Low battery protection voltage setting: 2.5V ~ 6V (Sets the voltage which
cuts the output to the motor when the power supply voltage is dropped)
Current Limiter: 50A ~ 300A (The current limit for suppressing power can also
be set and turned off)
Brake mix: 0% ~ 100% (Sets the brake strength of the max brake point from
neutral)
Neutral brake: 0% ~ 100% (Brake setting at the throttle neutral point)
INCLUDES:
Futaba MC401CR Electronic Speed Control with Reverse
REQUIRES:
Installing in vehicle and connecting to motor, receiver and battery NiCd or NiMH battery 4 - 6 cells (4.8V - 7.2V)
SPECS:
Operating system: Forward and brake (Resolution 255)
Power
requirement: NiCd, NiMH battery 4~6 cells (4.8 ~ 7.2V)
PWM frequency-
Forward:
100Hz ~ 10kHz Initial value: 2.5kHz ~ 3kHz
Brake: 2kHz
BEC voltage: 6V
Setting:
One-touch button
Current capacity: FET rating
Forward: 360A (Momentary load:
440A)
Brake: 120A
Fuse: 30A
Battery reverse protection/overload protection
Case
size: 1.01 x 1.03 x .51" (25.7 x 26.2 x 12.9mm) (excluding protruding parts)
Silicone wire gauge size: 14AWG equivalent
Weight: .39oz (11.2g)
