Item No NVK-3135 MORE HAVOC FOR YOUR BUCK Havoc Pro/Ballistic Brushless System installed in a Team AssociatedR SC10™ Short Course Truck. Novak's Havoc Pro/Ballistic Brushless System- a name synonymous with affordability and reliability - has five motor-turn options available [3.5T (#3130), 6.5T (#3132), 10.5T (#3133), 13.5T (#3134) & 17.5T (#3135)], perfect for a wide range of racing. The Havoc Pro Brushless ESC (#1735), which is also available individually, tops the list in the Havoc line because of its unmatched speed, economical price and advanced compatibility: The Havoc Pro is compatible with the entire Novak 540-sized brushless motor line and any ROAR-approved 540-sized sensored motor, all the way down to 3.5-turns. To add to the sophisticated Havoc Pro, Novak united the speed control with five of its next-generation Ballistic Brushless Motors. Combined, the Havoc Pro and Ballistic motors make the perfect complement for on-road and off-road enthusiasts, and spec-class racers. A LOT OF PROGRAMMING IN A SMALL PACKAGE Novak has packed the Havoc Pro Brushless ESC full of programmability into one easy-to-adjust profile. The Havoc Pro includes a customizable Throttle Curve, which smoothes out throttle operation. In addition, the Havoc Pro's Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. The dozens of adjustments allow drivers to fine-tune their vehicle's throttle braking for better control and advanced handling. But the customization doesn't end with braking. Novak also has built-in Battery Type Selection that auto detects among Li-Po, Li-Fe and Ni-MH batteries and prevents them from going below the critical safety voltage level, and a Motor Rotation feature that allows the user to easily select the direction of the motor. ADVANCED MOTOR TECHNOLOGY To complete the affordable system, the sensored Ballistic motors contain an easy-to-adjust timing assembly that alters the RPM range and features interchangeable wound stator construction, which creates dozens of racing options. Additionally, these sleek motors are ROAR/IFMAR approved, boast aremovable shielded sensor harness, and contain a 12.3mm nickel-plated sintered Neodymium rotorfor maximum motor acceleration, braking power and performance in high-temperature conditions. And like all Novak racing motors, these brushless motors are blisteringly fast, reaching speeds that will effortlessly satisfy any racer or basher. HAVOC PRO/BALLISTIC BRUSHLESS SYSTEM FEATURES Sensor-based for excellent torque and low-speed driveability Oversized front bearing [1/2" x 3/16" (12.7 x 4.8mm)] for increased load handling and bearing life Rebuildable motor design with removable shielded sensor harness, rotor, sensor assembly, wound stator, bearing cap, hardware, sleeve and both end bells Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125" pinion shaft that accepts all existing pinion gears Nine adjustable parameters: Minimum Brake (10 settings from 0-30%), Drag Brake (10 settings from 0-30%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-12%), Throttle Curve (Linear, Expo-1 and Expo-2), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Battery Pack Selection (Li-Po, Li-Fe, Ni-MH) Fifty percent more transistors than the Havoc 2S ESC for faster speeds, higher efficiency and increased load handling One-Touch Set-Up for quick, easy transmitter setup Locked Rotor Detection and Thermal Overload Protection (when used with a Novak sensored brushless motor) Novak's Radio-Priority and Polar Drive Circuits Included 30x30x6mm ESC clear cooling fan (#5648) mounted on factory-installed heat sink Meets RoHS compliance and includes 120-Day Warranty Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components NOVAK¡¦S HAVOC PRO/BALLISTIC BRUSHLESS SYSTEM SPECIFICATIONS System Motor Turns 3.5T 6.5T 10.5T 13.5T 17.5T Part Number #3130 #3132 #3133 #3134 #3135 Color-Coded Stator Black Black Blue Orange Yellow Kv (unloaded) 10,500 RPM/Volt 6,400  RPM/Volt 4,200  RPM/Volt 3,300  RPM/Volt 2,200  RPM/Volt Watts 620 390 235 195 130 Motor Size 2.07" x 1.41" (52.6 x 35.8 mm) System Weight (w/o wires) 7.96 oz. (225.7 g) Input Voltage 2S Li-Po cells, 2S Li-Fe cells or 4-6 NiMH cells (1.2V/cell) ESC Footprint 1.16" x 1.49" (29.5 x 37.8mm) Motor Limit All 3.5-turn Novak 540-size sensored brushless motors On-Resistance 0.00040 ohms @ 25 BEC 6.0 volts DC / 3.0 amps Rated Current 540 Amps @ 25 C trans. temp. Braking Current 540 Amps @ 25 C trans. temp. Status LEDs 4 Voltage Cut-Off 6.25V (Li-Po), 4.75V (Li-Fe) Power Wires (battery/motor) 14G Super-Flex Copper-Strand Silicone Wire Recommended Use On-Road High Traction / Basher Off-Road Medium Traction / Basher 10.5T spec-brushless racing 13.5T spec-brushless racing 17.5T spec-brushless racing REPLACEMENT / OPTIONAL PARTS #5315 or #5320 User-replaceable Input Harness (replacement) #5351-#5353 Brushless Shielded Sensor Harnesses - 4", 6" & 9"  (replacement/optional) #5416-#5418 Brushless Motor Cooling Kit (optional) #5508 14G Brushless Motor & Battery Wire Set (replacement) #5602 Remote Power Programming Switch (replacement) #5648/#5652 Clear Cooling Fan 30x30x6mm (replacement) #5679 Racing Power Trans-Cap Module -- 2S Li-Po and 4-6 cell Ni-MH(replacement) #5731 3.5mm Low-Loss Power Connector - 5 pairs (optional) #5909 Sintered Tuning Rotor-13mm (optional) #5940 Ballistic Front End Bell and Bearings - 1/8" (replacement) #5941 Ballistic Sintered Rotor -- 12.3mm (replacement) #S5420-#S5424 Brushless Motor Sleeves (replacement/optional) #S5932 Ballistic Motor Hardware Kit (replacement) #S5942 Ballistic Timing/Sensor Assembly (replacement) #S5943 Ballistic Bearing Cap with Rear Bearing (replacement) #S5944 Ballistic Back End Bell (replacement) #S6603-#S6621 Ballistic Hand-Wound Stator -- 3.5T - 21.5T (replacement/optional)