Smart
Tray SE Discharger is
the ultimate battery maintenance equalizing system. In addition to
all of the features found in the original Smart Tray (#4500), the
Smart Tray SE (#4510) now contains new sights and sounds, an
optional Hold
Discharge Voltage Mode, as
well as a higher
voltage cut-off threshold.
Among the more noticeable
enhancements found in the Smart Tray SE are its new sights and
sounds. Cool blue LEDs,
located beneath each cell, indicate the discharge status of each
cell/battery pack. Accompanying the LEDs is a buzzer that
will emit a short tone to indicate when the individual cell is
discharged, and a long tone to indicate when the entire pack is
discharged.
In addition to our standard mode,
we've added an optional Hold
Discharge Voltage Mode. In
essence, whatever discharge voltage is selected, the Smart Tray SE
will constantly monitor and hold each cell at the selected voltage.
The Maximum Cut-Off
Threshold has also
been increased in the Smart Tray SE. In both the standard and the
new Hold Discharge Voltage Mode, users can now choose from 0.0V
to1.2V in 0.1 volt increments.
At the core of the Smart Tray SE is
Novak's exclusive Individual
Cell Monitoring Circuitry (ICM).
This sophisticated circuitry is microprocessor-controlled, which
enables the Smart Tray SE to provide the highest degree of care and
accuracy for all Ni-MH and Ni-Cd cells - especially for today's new
breed of Ni-MH cells. The ICM Circuitry accurately discharges and
monitors each individual cell's voltage, and has an LED at each cell
that indicates its discharge status. A user-programmable cut-off
voltage is constantly displayed on a large
easy-to-read 2-digit LED. Once the cut-off voltage of the
individual cell is reached, the Smart Tray SE automatically stops
discharging that cell (indicated by its LED going out), and
subsequently eliminates the need to monitor the pack. When all the
LEDs are out, the pack is discharged and equalized.
With each cell receiving individual
care and attention, users can set it and forget it without worrying
about damaging the batteries left in the discharge tray too long. A
large heat sink provides ample cooling for discharge components,
while a Lexan cover protects the electronics.
|
SMART TRAY SPECS AT A GLANCE |
 |
Case Size: 6.96" x 3.00"
x 2.75" (17.68 x 7.62 x 6.98 cm) |
|
|
Weight: 1.13 lbs. (513 grams) |
|
|
Cell Capacity: 1-6 Sub-C
Ni-MH and/or Ni-Cd cells |
|
|
Cell
Type: Sub-C Ni-MH and/or Ni-Cd cells |
|
|
Input Voltage: 12-15
Volts DC |
|
|
Discharge current: 2.7 amps |
|
|
Cut-Off voltage
(adjustable): 0.1-0.9V/cell (0V in dead-short mode) |
|
SMART TRAY FEATURES AT A
GLANCE |
|
|
New BLUE LEDs to
indicate discharge status |
|
|
New
buzzer to indicate when cell/pack discharge is complete |
|
|
New Hold Discharge
Voltage Mode |
|
|
New
Cut-Off Voltage (in both modes); Adjustable from
0.0-1.2V/cell in 0.1V increments |
|
|
Individual Cell
Monitoring Circuitry (ICM) |
|
|
Adjustable Cut-Off Voltage (0.1 Volt increments) |
|
|
Push Button for ON/OFF
control and cut-off voltage adjustment |
|
|
Dead-short mode |
|
|
Large easy-to-read
2-digit LED |
|
|
Discharge indicator LEDs at each cell |
|
|
Large cooling heatsink
for long-term reliability |
|
|
True
voltage cut-off adjustability for maximum pack "tuning" |
|
|
Convenient, high quality
spring clips securely hold batteries in place |
|
|
Lexan
faceplate protects the Smart Tray's electronics |
|
|
12V Wall Adaptor
included |
