Tamiya 58246 - Tamiya 1/10 Stadium Raider TL-01 Chassis

This is the 1/10 scale Stadium Raider Stadium Truck from Tamiya.
It Has Four-Wheel Shaft Drive On-Road Electric on a TL01 Chassis.

FEATURES: Three Step Forward and One Step Reverse Mechanical Speed Control,
Shaft Driven Four Wheel Drive with Front and Rear Gear Differentials
Sealed Gearboxes
Front and Rear Double Wishbone Suspension
Coil Spring Damped Suspension System (not oil-filled shocks)
Polycarbonate Monocoque Type Frame
540 Type Electric Motor
Spire Spike Tires
One Piece, Gray Plastic Wheels
Plastic Bushings
TL01 Chassis with Mid-Motor Mount in Front of the Rear Wheels
Highly Detailed Polycarbonate Body With Decals

INCLUDES: Mechanical Speed Control
Motor
Rubber Treaded Tires
TL01 Chassis
Decals
Clear Lexan Body

SPECS: Motor Type: 540 size with bullet type connectors
Body: Stadium Raider Truck Body
Speed Control: 3-step forward, 1-step reverse, mechanical
Shocks: coil spring damped (not oil filled)
Tires: O.D.: 85mm (3.35")
Width: 30.6mm (1.2")
Wheels: pattern: 5-spoke
adapter type: standard hexagonal (same as Kyosho)
wheel color: White
Diameter: 54mm (2.13), Width: 29.2mm (1.15")
Length: 423mm ( 16.67 inches ) Weight: 1640 grams
Width: 204mm ( 8.04 inches )
Height: 177mm ( 6.98 inches )
Wheel Base: @ 260mm ( 10.24 inches )
BEARINGS (optional): Twenty-four 5x11mm total
Four- Prop Shaft (see comments)
Twelve- Gearbox
Eight- Wheels/Axle

REQUIRES: 2-Channel Radio with 2-Standard Servos
Six Cell Battery with Tamyia Connector
Charger
Paint
Phillips Head Screw Drivers
Needle Nose Pliers
Wire Cutters
Hobby Knife
Lexan Scissors
CA Glue

COMMENTS: The kit is colored yellow on the box. The decals are lights,
bumper, sponser names, "Stadium Raider" logo, and a checkerd strip
down the side
This does not use a steering bellcrank assembly
The steering tie rods, front & rear camber rods are not adjustable
The motor mount is designed to only be able to use pinion gears
that are 19, 21 or 23 teeth and 48 pitch Metric.
This car utilizes a shaft drive system for the four wheel drive. The
"propeller shaft" is the shaft that runs lengthwise along the car
to drive the front gearbox.

?