Team Powers - XPS Sport Brushless ESC Features: Support with all kinds of sensored/sensorless brushless motors in RC model 1/10th, 1/12th Car & Truck Support Running Mode: Forward with brake, Forward/Reverse, Forward/Reverse with Brake Manual/Factory running profile setting. For factory running profile, it includes 9 level for modify race and 4 levels LCTS (linear control timing system) for race competitions Use the pocket-size program card to program the controller settings Multiple protection functions: Low voltage cut-off protection, Over heat protection, Throttle signal loss protection Extra smaller size aluminum casing for cooling Extra battery output adaptor connecting to the motor cooling fan Techincal Specifications: Model: XPS- Pro XPS-Sport XPS-EL Continuous current: 140A 70A 35A Burst Current (10sec): 720A 400A 160A Battery Input: 3.7V LiPo 2 cells 2 cells 2 cells 1.2V NiMh/NiCd 4-6 cells 4-v6 cells 4-6 cells BEC Output: Linear 6V/2A Linear 6V/2A Linear 6V/2A Weight (not included wiring& fan) ~42g ~41g ~40g Dimension(L x W x H) mm (Include the fan assembly to the ESC) ~32 x 30 x 28 ~32 x 30 x 28 ~32 x 30 x 28 Motor limit with 2cell x 3.7V Lipo Assume motor at 0 degree timing 4Turn or over 6.5 Turn or over 9.5 Turn or over  Setting Card Program Items includes: Power Profile Over Heat Protection Running Profile Initial Punch Level Low Voltage Protection Advance Punch Level Max Reverse Force PWM Frequency Max Brake Force Sensor Timing(Phase1) Drag Brake Force Manual Eng Ver: http://www.team-powers.com/manual/XPS_Sport_EL_UG_07132010_eng.pdf Manual Chinese Ver: http://www.team-powers.com/manual/XPS_Sport_EL_UG_09192010_ch.pdf Setting CardChinese Ver: http://www.team-powers.com/manual/XPS_Sport_EL-SettingCard_ch.pdf  Team Powers BL Sensor Motor (6.5T~11.5T, 13.5T or 17.5T) Features: - Design Specification: Based on IFMAR/ROAR Rule, IFMAR approved - Motor Dimensions (Diameter x Length) 35.8mm x 51mm - Shaft Diameter: 3.17mm - Magnet Dimensions (Diameter x Length): 12.5mm x 24mm(3.5turn~9.5turn), 12.3mm x 24mm(10.5turn~17.5turn) - Variable Endbell with changing the peformance of the motor on output power and torque - Weight: ~170g - Recommended RC Model Car: 1:10 model car, Buggy, MINI Car - 3.5turn~17.5turn avaliable

This motor is approved by ROAR, the official U.S./Canadian sanctioning body for R/C car and truck competition.